Online Services

Lost your password?

Not registered? Sign up now!

Post-Process Systems
taping machines

FTM

See Product

The FTM - Flexible Taping Machine, is a workbench taping system for insulating or bundling splices or wires.
It has a typical processing time of 1.8 seconds.
The FTM is an all-in-one machine, since in the same machine it is possible to process normal and end-splices,
without additional setups.

ITM

See Product

The ITM - Integrated Taping Machine, is a workbench taping system for performing spot taping on in-line processes.
It can be integrated with other machines like Cut & Strip machines or Twisting machines.
It has a typical processing time of 1.8 seconds.
The wire flows freely inside the machine, until it receives a signal from the master machine to perfom the spot.
At this point it locks the cable and the taping head moves forward to perform the operation.

TM 100

See Product

The TM 100 is a versatile bench-top machine for taping wires, cables and harnesses. It is safe and precise thanks to the cutting-edge components with which it is built.
Two models are available: TM 100 R (roller feed) and TM 100 B (belt feed).
The taping machine is controlled by the operator through a limited number of settings. Ideal for small productions and prototypes.
Thanks to the innovative design and some cutting-edge solutions, such as the automatic safety cover of the taping head, the use of the TM 100 is simple and safe.
The automatic control of the taping through servomotors managed by digital controller allows an extreme precision and repeatability of the process.

TM 200

See Product

The TM 200 is a versatile bench-top machine for taping cables, wires and harnesses. It is safe and precise thanks to the cutting-edge components with which it is built.
It is available in the TM 200 L model.
The taping machine is easily programmable. Sequential programs can be prepared to process complex or branched wiring in a simple and repeatable way. Since the length of the linear conveyor is limited, the TM 200 is ideal for short cable taping. Up to 20 different taping operations can be stored.

TM 300

See Product

The TM 300 is a standalone machine for taping wires and cables. It is safe and precise thanks to the cutting-edge components with which it is built.
Two models are available: TM 300 B (belt feeding) and TM 300 R (roller feeding).
The taping machine is easily programmable. Complex or branched wiring can be prepared in a simple and repeatable way. The TM 300 uses a mixture of linear and belt / roller feeding: this allows operations on long or short wiring, as needed. If equipped with belt feed, it can process HV (orange) cables widely used in the automotive industry if necessary.

news

contacts

web design alessandro mariotto