Wire Processing Machines
Cut Strip Machines
Cut Strip Terminate Machines
Stripping Machines
Cutting Machines
Jacket Stripping
Crimping Machines
Hand Crimping
Tools
Crimp Quality
Assurance Systems
Harness Testing Machines
Micrograph Systems
Marking Systems
Pre-Process Systems
Post-Process Systems
Braid processing
equipments
Grommet
expanding systems
Ultrasonic Welding
Systems
Special Applications
|
Pre-Process Systems | |
| prefeeders/dereelers |
03
See Product
Non-motorized unwinder with floor stand
0300
See Product
Horizontal winder/unwinder for coils up to 20 mm O.D.
ABW
See Product
High-end feeding system for processing lines with reels 800 /1000 / 1260 in diameter and weighing 300 / 1000 / 1260 Kg
ARG
See Product
The unwinder ARG is designed to unwind hose coils such as corrugated
tubes, hydraulic and high press air tubes as well as similar material of
up to 600 mm (ARG 600), 800 mm (ARG 800), 1000 mm (ARG 1000) and 1200 mm (ARG 1200) O.D.. The ARG is also applicable for light wire
harnesses.
ARG 30 M
See Product
The motor-driven unwinders of the ARG 30 M series are designed to unwind
hose coils such as corrugated tubes, hydraulic and high press air tubes
as well as light wire
harnesses and rubber-profile coils. Coils outer diameter up to 570 mm and maximum weight 30 Kg
DHS 1000
See Product
The sag control unit DHS 1000 D is applicable as speed control and operates by contact-free detection of the
materials’ sag and provides, according to the material position,
setpoints to the connected machines.
DR30
See Product
Small horizontal dereeler for coils up to 170 mm O.D. and maximum weight 7 Kg
LF 65
See Product
The Prefeeding System LF65 allows to dereel cable or wire reels from 400 to 600 mm in diameter.
It can be integrated in line with every cut or cut/strip machine, allowing a correct and linear feeding of the cable with a constant tension in both dereeling directions. The operating machine can be placed on the upper bench top of the dereleer, creating a compact processing line.
It can be integrated in line with every cut or cut/strip machine, allowing a correct and linear feeding of the cable with a constant tension in both dereeling directions. The operating machine can be placed on the upper bench top of the dereleer, creating a compact processing line.
LF 80 / LF 90
See Product
Motorized prefeeding systems for power cables, allows to dereel cable reels from 400 to 800 mm in diameter.
These Prefeeders can be integrated in line with every cutting or cutting and stripping machine, marking machine and automatic cut-strip terminating machine, allowing a correct and linear feeding of the cable with a constant tension in both dereeling directions.
These Prefeeders can be integrated in line with every cutting or cutting and stripping machine, marking machine and automatic cut-strip terminating machine, allowing a correct and linear feeding of the cable with a constant tension in both dereeling directions.
PF 1000
See Product
Bench-top dereeler for wires, cables and tubes up to 300 mm O.D. Maximum reel weight 20 Kg.
PF 2200
See Product
The PreFeeder 2200 is a free-standing, electrical prefeeding machine
designed to pull wire and cable from reels weighing up to 50 kg (110
lbs.).
PF 4600/PF 4700
See Product
The PreFeeder 4600/4700 are the ideal feeding system for high performance
cable processing lines with spools weighing up to 1000 Kg (1'334 lbs.).
The system is characterized by a rugged construction and powerful drive.
RHT 120/160/260
See Product
This equipment has been designed and perfectly realized with the intent to reduce the time of shifting, lifting and unwinding drums.
SVO-1
See Product
Horizontal dereeler for coil up to 270 mm O.D. and maximum weight 28 Kg
ZG 200 B2
See Product
Prefeeding system for cables and tubes up to 30 mm O.D.
company
products
solutions & services
